HID Headlights are small for high-intensity discharge, which is how xenon lights work. HID headlights beam a light-emitting plasma. They are made by combining a xenon gas and vaporized salt. They are activated on an arc by the ballast in the range of 30,000 V. It is maintained a voltage range of 80 to 100 V.Step 1 – Remove the old headlight bulb. Open the hood of your car by pulling on the hood release lever by the driver's side kick panel. If you look at the back of your headlights, you should see a black cover with a tab on the top. Push in the tab and release the cover. Set the cover aside for now.
How To: Replace the burned out headlights in your car How To: Fix the lamp out module on a 1996 Ford Explorer if your headlights are broken How To: Replace the headlights on a 99-04 Mustang How To: Replace a headlight in a Cadillac How To: Wire and install a Mustang Halo headlight
A short tutorial on how to replace xenon bulb and also, how to remove headlight from your car, which is the tricky part of this job. You will need- D1S bulbXenon headlights have a ballast to ignite the high voltage xenon lights when they turn on that can remain energized even if the lights are turned off. Be sure to disconnect the headlight assembly or battery before attempting to replace it. If your RX350 has a HID headlight burnt out, it could be a burnt out bulb or failed headlight ballast. Access to the bulb is from the wheel well. remove the plastic doors. turn the ballast counter clockwise and pull the bulb straight out. . 331 3 496 528 764 339 319 774