The BMW 325i is one of the E90 model family from BMW. The 6 cylinder, double overhead camshaft naturally aspirated engine has 4 valves per cylinder and a volume of 2.5 litres. This unit musters power and torque figures of 215 bhp (218 PS/160 kW) at 6500 rpm and 250 Nm (184 lbft/25.5 kgm) at 2750-4250 rpm respectively.
The Valvetronic motor is used on BMW E90 models with a normally-aspirated engine. It is responsible for actuating an eccentric shaft that adjusts intake valve lift. The motor itself is pretty reliable and does not fail too often. However, you will have to remove it for other engine repairs and the gasket that seals the mounting surface of the
Refer to the minimum rotor thickness chart below while measuring. Brake rotor minimum thickness. Front. Rear. E90 Normally-aspirated. 22.4mm (0.88in) 18.4mm (0.72 in) E90 Turbocharged. 28.4mm (1.1 in)
it is on BMW. I used to drive a 2006 325. The car comes with a 3.0L Inline 6 producing 215 horsepower and 185 lb of torque. If you have the AWD 325, it does 0-60 in 7.5 seconds, while the RWD 325 does a 0-60 time of 7.2 seconds. If your rwd 325 is optioned with a MT, then it will do a 0-60 time of around 6.7 seconds.
How wide is the vehicle, 2010 BMW 3 Series Sedan? 1817 mm 71.54 in. What is the curb weight, 2010 BMW 3 Series Sedan (E90 LCI, facelift 2008) 320d (184 Hp) xDrive? 1525 kg 3362.05 lbs. What is the gross weight, 2010 BMW 3 Series Sedan (E90 LCI, facelift 2008) 320d (184 Hp) xDrive? 2045 kg 4508.45 lbs. How much trunk (boot) space, 2010 BMW 3
The BMW N53 is a naturally aspirated straight-6 petrol engine which was produced from 2006 to 2013. The N53 replaced the BMW N52 and was released in 2006 in the post-facelift E60 5 Series . BMW never sold the N53 engine in North American, Australian and Malaysian vehicles, due to the high sulphur content of the fuel available in these markets. [1]
. 827 651 718 242 268 777 155 70
bmw 325i e90 2010 specs
